Sony XR-F21RDS - Manual (Page 20)

Sony XR-F21RDS (
E
,F,G) 0-000-000-11 (1)
20
EN
Actual total number:
To erase tracks in Programme 2, press the
PGM button momentarily to prompt the
Programme 2 Configuration Indicator.
Notes
• When entering Programme Edit Mode from Programme
Memory Playback Mode, the slot number of the track
currently playing will appear on the display.
• Entering Programme Edit Mode from Normal Playback
Mode:
— When all 12 track slots are filled in the programme,
the number 12 appears on the display.
— When less than 12 tracks have been filled, the number
of the first available slot appears on the display. For
example, if only 7 tracks have been input, the number
8 will appear on the display.
2
Press the or button to
designate which track you wish to erase
(shown on the display).
The track currently registered in the 6 slot of
Programmeme 1.
3
Once designated, press the SEL button
for more than two seconds. n The track
will be erased.
Once the track in the 6 slot has been erased,
tracks in the 7-12 slots will move up one slot.
Note
In the case where all 12 track slots are filled in a
programme, erasing one track causes the 12 slot to become
empty (for every erased track, another slot becomes
vacant).
4 A To continue erasing tracks, repeat
steps 2 and 3.
B To finish erasing tracks, press the
PGM button for more than two
seconds.
New track in slot 6
DISC TRACK
CD1 4 7 10 P 6 .
The track slot
number
DEL – 10 P 6 . ––
µ
DISC TRACK
CD1 2 8 10 P 6 .
Inserting Tracks into a
Programme
1
Press the PGM button for more than
two seconds.
The system will enter the programme edit
mode.
If you wish to insert tracks into Programme 2, prompt
the Programme 2 Configuration Indicator by pressing
the PGM button momentarily.
2
Press the or button to
designate to which track slot number
you wish to insert a track.
3
Play the track you wish to insert.
4
Press the SEL button momentarily to
enter the track.
The newly entered track will fill the 6 track
slot, and tracks 7 and up will move down
one slot.
Note
Once all 12 slots have been filled, “*Mem Full*” will
appear on the display, and it will not be possible to
insert more tracks.
5 A To continue inserting tracks into the
programme, repeat steps 2 through 4.
B To finish inserting tracks, press the
PGM button for more than two
seconds.
Program 1
Configuration
Indicator
The track slot
number
P1 EN T + ER+
µ
DISC TRACK
CD1 5 3 10 P 8 .
DISC TRACK
CD1 2 8 10 P 6 .
DISC TRACK
CD1 2 8 10 P 7 .