Sanyo HIGH-DEFINITION DIGITAL PLASMA TELEVISION DP50747 - Manual (Page 24)

24
CONNECTING ANALOG CABLE, VCR, AND AN ANTENNA TO THE DTV
VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 2
VCR
1 Connect Analog Cable system to the VCR
“Antenna In.”
2 Connect the VCR AV out jacks to VIDEO1 Yellow,
White, and Red jacks.
3 Connect an Antenna to the DTV ANT terminal.
4 Press INPUT to select Video 1 to watch Analog
Cable channels OR to TV channels to watch
Antenna channels.
5 Select channels with the VCR’s remote control.
Select Antenna channels with the DTV remote
control.
IMPORTANT FACT:
Composite jacks offer only
480i (SDTV ) resolution.
YELLOW, WHITE,
& RED JACKS
❸
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
DTV VIDEO1
CABLE SYSTEM
(Service provider)
OPERATING TIP:
Refer to the owner’s manuals and user’s guides that
came with your external equipment for connection
options.
❶
❷
REMOTE CONTROL
❹
INPUT
DTV ANALOG/DIGITAL
ANTENNA IN (ANT)
ANTENNA
“No Signal” will appear randomly
on the screen when no signal is
detected at the video jack. ● Check Audio / Video connections.
● Check external equipment
connections.
● Check external equipment setting.
● Press the INPUT key.
● Switch on external equipment.
● Set external equipment output
connections to match input
connections.