Audio out (av receiver), Dtv audio out jacks (digital & analog), Helpful hints (problems/solutions) – Sanyo HIGH-DEFINITION DIGITAL PLASMA TELEVISION DP50747 User Manual
Page 26
26
CONNECTING AN AV RECEIVER TO THE DTV
DTV AUDIO OUT JACKS (DIGITAL & ANALOG)
DTV AUDIO OUT
COAXIAL
CABLE
AV RECEIVER
No Sound or Poor Sound
●
Check external equipment
connections.
●
Switch on external equipment.
SYMPTOM
CHECK THESE CONDITIONS
TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
OPERATING TIP:
Refer to the owner’s manual that
came with your external equipment
for connection options.
❶
❷
AUDIO OUT
[For Stereo
Sound]
1
Connect a Coaxial Digital Audio cable from the DTV Digital
Audio Output jack to a Coaxial Digital Audio In jack on an AV
Receiver.
2
Connect an Audio cable from the DTV Audio Out jacks to Audio
In jacks on the AV Receiver.
Note:
Dolby
®
Digital 5.1 audio is available only at the Digital Audio Output
and only when received as part of a Digital Antenna signal.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)