Sanyo HIGH-DEFINITION DIGITAL PLASMA TELEVISION DP50747 - Manual (Page 7)

7
SPECIFICATIONS
SCREEN SIZE: 50" Wide Screen (Measured
Diagonally)
SCANNING FORMAT: 720p (All Signals are
Converted to 720p)
RESOLUTION: 1365 x 768 (WXGA)
RF ANTENNA INPUT: 75 ohm—Digital/Analog
POWER REQUIREMENT: Source: AC 120V, 60Hz
POWER CONSUMPTION: 460 Watts (Average)
SOUND: Two Speakers, size: 6 x 12 cm
MOUNTING BRACKET: Vesa Standard or Universal
480 x 360 or 480 x 200
AMPLIFIER: Built-in with 7.0W/ch
JACKS / CONNECTORS:
VIDEO1 Composite Video and Audio R/L
S-Video
VIDEO2 Component (Y / Pb / Pr) with
Audio R/L Input
VIDEO3 Component (Y / Pb / Pr) with
Audio R/L Input
Digital Audio Output: Dolby® Digital (Coaxial Cable)
Analog Audio Output: Audio R/L
HDMI 1 Input: 19-pin connector
(Picture /Sound with HDCP)
HDMI1 with DVI Interface port
HDMI 2 Input: 19-pin connector
(Picture /Sound with HDCP)
HDMI 3 Input: 19-pin connector
(Picture /Sound with HDCP)
Download Jack Service port for production use
only.
SIZE AND WEIGHT (APPROXIMATELY):
Horizontal Dim. (Width): 49.4 in. (1255mm)
Vertical Dim. (Height): 33.3 in. (846.0mm)
Depth Dim. (Thickness): 11.1 in. (281.0mm)
Weight: 102.0 (lbs.) 46.3(Kg)
Specifications are subject to change without notice.
CAUTION: FCC Regulations state that improper modifications or un-
authorized changes to this unit may void the user’s authority
to operate the unit.
This symbol on the nameplate means the product is
Listed by Underwriters’ Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
Trademarks Information:
Manufactured under license from Dolby Laboratories.
“Dolby” is a trademark of Dolby Laboratories.
“As an E NERGY S TAR
® Partner, Sanyo
Manufacturing Corporation has determined
that this product meets the E
NERGY S TAR
®
guidelines for energy efficiency.”
with a double “Z” is a registered trademark of
Sanyo Manufacturing Corporation.