Sony BDV-E500W - Manual (Page 105)

A
d
ditio
n
al Inf
o
rm
at
ion
105 US
Dimensions (approx.) 105 mm × 225 mm × 85
mm (4
1 /
4
in × 8 7 /
8
in ×
3 3 /
8
in) (w/h/d)
Mass (approx.) 0.6 kg (1 lb 6 oz)
Subwoofer (SS-WSB91)
Speaker system Subwoofer Bass reflex
Speaker unit 180 mm (7 1 /
8
in) cone type
Rated impedance 1.5 ohms
Dimensions (approx.) 225 mm × 395 mm × 325
mm (8
7 /
8
in × 15 5 /
8
in ×
12 7 /
8
in) (w/h/d)
Mass (approx.) 6.2 kg (13 lb 11 oz)
General
Power requirements 120 V AC, 60 Hz
Power consumption On: 120 W
Standby: 0.3 W (at the
Power Saving mode)
Output voltage/current
(DIGITAL MEDIA PORT)
DC 5 V/700 mA
LAN (100) 100BASE-TX Terminal
EXT External memory slot (For
connecting the external
memory)
DC output: 5 V 500 mA
Max
Dimensions (approx.) 430 mm × 93 mm × 400
mm (17 in × 3
3 /
4
in ×
15 3 /
4
in) (w/h/d) incl.
projecting parts
430 mm × 93 mm × 430
mm (17 in × 3
3 /
4
in × 17
in) (w/h/d) (incl. Wireless
transceiver)
Mass (approx.) 5.4 kg (11 lb 15 oz)
Surround amplifier (TA-SA100WR)
Amplifier Section
AUDIO POWER SPECIFICATIONS
for the US model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 50 watts
per channel minimum
RMS power, with no more
than 0.7% total harmonic
distortion from 250 milli
watts to rated output.
U.S. models:
Surround mode (reference) RMS output power
143 W (per channel at 3
ohms, 1 kHz, 10% THD)*
Other models:
Stereo mode (rated)
80 W + 80 W (at 3 ohms,
1 kHz, 1% THD)
Surround mode (reference) RMS output power
143 W (per channel at 3
ohms, 1 kHz, 10% THD)*
* Depending on the source, there may be no sound
output.
Rated impedance 3 - 16
Ω
General
Power requirements
120 V AC, 60 Hz
Power consumption On: 50 W
Dimensions (approx.) 85 mm × 100 mm × 330
mm (3
3
/ 8 in × 4 in × 13 in)
(w/h/d) (incl. Wireless
transceiver)
85 mm × 100 mm × 345
mm (3
3
/ 8 in × 4 in × 13
5
/ 8
in) (w/h/d) incl. speaker
cord cover and speaker
cord holder
Mass (approx.) 1.7 kg (3 lb 12 oz) incl.
speaker cord cover and
speaker cord holder
Wireless transceiver (EZW-RT10/EZW-
RT10A)
Communication system S-AIR Specification
version 1.0
Frequency band 2.4000 GHz - 2.4835 GHz
Modulation method DSSS
Power requirements DC 3.3 V, 350 mA
Dimensions (approx.) 50 mm × 13 mm × 60 mm
(2 in ×
17 /
32
in × 2 3 /
8
in) (w/
h/d)
Mass (approx.) 24 g (1 oz)
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.