Sony BDV-E500W - Manual (Page 57)

T
une
r
57 US
To operate by using D.TUNING
1
Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
2
Press D.TUNING.
3
Press the number buttons to select the
frequencies.
4
Press .
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1
Press OPTIONS.
The options menu appears.
2
Press X/x to select [FM Mode], then
press .
3
Press X/x to select [Monaural].
• [Stereo]: Stereo reception.
• [Monaural]: Monaural reception.
4
Press .
The setting is made.
You can operate the tuner function using the
system menu on the front panel display.
To preset radio stations
1
Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
2
Press and hold TUNING +/– until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) light up in the front panel display.
3
Press SYSTEM MENU.
4
Press X/x repeatedly until “TUNER
MENU” appears in the front panel
display, then press
or c.
5
Press X/x repeatedly until “MEMORY”
appears in the front panel display, then
press
or c.
A preset number appears in the front panel
display.
6
Press X/x to select the preset number
you want.
Tip
• You can select the preset number directly by
pressing the number buttons.
7
Press .
“COMPLETE” appears in the front panel
display, and the station is stored.
8
Repeat Steps 2 to 8 to store other
stations.
9
Press SYSTEM MENU.
The system menu turns off.
If an FM program is noisy
Operating the tuner function
using the system menu
TUNED ST
TUNED ST