Installing the speakers on a wall – Sony BDV-E500W User Manual

Page 17

Advertising
background image

17

US

Ge
tting Star

te

d

Caution

• Contact a screw shop or installer regarding the wall material or screws to be used.

• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach

the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.

• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or

improper screw installation, natural calamity, etc.

Before installing the front speakers on a wall, you need to disassemble the speakers. You can install the
upper part of a speaker on a wall.

To disassemble the speaker

1

Disconnect the speaker cords from the speaker.

2

Remove the screw (pre-installed) at the rear of the speaker.

This screw is used when reassembling the speaker. Be sure not to lose the screw.

Installing the speakers on a wall

Rear of the speaker

Rear of the speaker

Screw

Advertising