Sony Stereo Turntable System PS-LX300USB - Manual (Page 11)

11 GB
Oper
ations
PS-LX300USB.GB.3-198-123-14(1)
Continued


For Windows Vista
([Control Panel] is in the [Control Panel Home] view)
1
Select [Settings] from the [Start]
menu.
2
Select [Control Panel].
3
Click [Hardware and Sound].
4
Click [Sound].
5
Click the [Recording] tab.
6
Select [USB Audio CODEC] for
[Microphone].
7
Click [Set default].
8
Select [USB Audio CODEC], then click
[Properties].
9
Click the [Advanced] tab.
10
Select [2 channel, ...] (ex: [2 channel,
16 bit, 44100 Hz (CD Quality)]) from
the [Default Format] drop-down list.
11
Click [OK].
Note
To input stereo signal from the turntable to the computer,
performing steps 8 through 11 is necessary.
Recording audio tracks from the
turntable on a computer
For details on recording operations, refer to
the supplied document titled “Recording audio
tracks of a vinyl record to your computer.”
For details about using the software, refer to
the “Sound Forge Audio Studio LE” quick start
guide (on the supplied CD-ROM) or on-line
help of the software.