Sony Stereo Turntable System PS-LX300USB - Manual (Page 17)

1 GB
Additional I
nf
or
ma
tion
PS-LX300USB.GB.3-198-123-12(1)

For Windows Vista
([Control Panel] is in the [Control Panel Home] view)
1
Select [Settings] from the [Start] menu.
2
Select [Control Panel].
3
Select [System and Maintenance].
4 Select [Device Manager].
5 Check the [Device manager] screen.
Check the devices installed as follows.
– [USB Human Interface Devices] and [HID-
compliant consumer control device] under
[Human Interface Devices]
– [USB Audio CODEC] under [Sound, video and
game controllers]
– [USB Composite Device] under [Universal Serial
Bus controllers]
Notes

When connecting to different USB ports, you may
have to install USB drivers.
 When connecting to different USB ports, the
computer automatically installs the driver again. In
such case, check that the driver is correctly installed
as in this procedure.
The recorded sound is disrupted.

The CPU of your computer is overloaded.
Exit other applications.

Other USB devices are connected to your
computer and being operated simultaneously.
Quit operating other USB devices.
You cannot record sound from the
turntable.

The audio recording device of your computer
is not set correctly. See pages 10 and 11 to
check the device settings.
There is noise in recorded sound.

There are electrical wires, fluorescent
lights or mobile phones near the turntable.
Move away from any possible sources of
electromagnetic interference.
Notes
 For details on the operation of your computer, refer to
the operating instructions of your computer.

There can be some breakdowns that cannot be solved
even with Troubleshooting. In such cases, contact your
nearest Sony dealer.