Sony Stereo Turntable System PS-LX300USB - Manual (Page 8)

 GB
PS-LX300USB.GB.3-198-123-12(1)
Operations
Playing a Vinyl Record
45 r/min
adaptor
STOP UP/DOWN
1
Place a vinyl record on the platter.
Note
Place only one vinyl record on the platter at a time.
If two or more vinyl records are stacked on the
platter, the stylus will not make proper contact with
the grooves and the quality of reproduction will be
impaired.
2
Press the Speed select button to
select the speed.
3
Set the SIZE SELECTOR to 17 or 30.
4
Turn the protective cover to expose
the stylus.
5
Close the dust cover.
6
Press START.
The platter starts rotating.
Note
Lower the volume of the amplifier to prevent damage
to it. If the tone arm descends and the stylus touches
the vinyl record, a loud creaking noise may occur
and harm the amplifier or speakers. Adjust the
volume of the amplifier after the stylus descends.
7
Adjust the volume on your amplifier.
When playback is finished
The tone arm returns to the arm stand
automatically, then the platter stops rotating.
To stop playing
Press the STOP button.
The tone arm returns to the arm stand.
The platter stops rotating.