High rate scan mode with external trigger – Sony XCL-U1000 User Manual
Page 15
15
Functions of the XCL-U1000C/U1000
TRG
LVAL
DVAL
Output
Vertical timing
(Horizontal timing is the same as Normal mode.)
FVAL
T1
T2
T3
1H
b
a
2
1
1600CL
320CL
d
c
Trigger mode
T1
*1
T2
Shutter
*2
T3 [ms]
1/30 s
37.40
1/100 s
14.04
1/120 s
12.40
See the
1/250 s
8.08
Edge detection
formula on
100 us or more,
1/500 s
6.06
the right.
1 s less than
1/1000 s
5.08
1/2000 s
4.53
1/5000 s
4.28
1/10000 s
4.17
66.7 ms
70.82
33.3 ms
37.34
See the
100 us or
10.0 ms
14.02
Puls width
formula on
more,
8.33 ms
OFF
12.33
detection
the right.
1 s less than
4 ms
8.03
1 ms
6.03
100 us
4.13
*1 Set a trigger cycle (1/T1) using the following
formula.
T1>1920 (a+b)/36000+0.1[ms]
Refer to the table of the high rate scan mode (no
external trigger) for the values of “a,” “b,” “c,” and
“d.”
*2 In the edge detection mode, you cannot set a shutter
speed slower than 1/15 s. If the rate is over 30 fps,
you cannot set a shutter speed to 1/30 s. Set a rate
referring to the table of the high rate scan mode (no
external trigger).
■High rate scan Mode with external trigger