Setting up remote modules, Setting up lamp modules, Setting up wall switch modules – Smarthome SUPERVISED WIRELESS SECURITY CONSOLE PS561 User Manual

Page 13

Advertising
background image

SETTING UP REMOTE MODULES

SETTING UP

LAMP MODULES

When the alarm trips, lamps connect-

ed to Lamp Modules (set to the same

Housecode as the Console) flash on

and off for the duration of the alarm.
After 4 minutes (or when you disarm
the alarm) the lamps stop flashing and

remain on.

If you arm the system to give an exit

delay, Lamp Modules set to the same

Housecode and Unit Code as the Con-
sole turn on during the exit countdown
time. You can also control Lamp Mod-
ules set to this code from the [LIGHT

ON] and [LIGHT OFF] buttons on the

HT544 and KF574 Remote Controls,

or from the [SECURITY LIGHT] but-

tons on the SH624 Remote Control.

Choose a lamp you wish to be part of

the security system. Make sure the
lamp’s on/off switch is on and plug the
lamp into the Lamp Module, Model
No. LM465 (sold separately). Plug the

Lamp Module into any convenient

outlet. Set the Housecode and Unit
Code dials on the Lamp Module to the
same letter and number as you set on
the Console.

c

l

E

SETTING UP

WALL SWITCH MODULES

When the alarm trips, lights connected

to Wall Switch Modules (set to the
same Housecode as the Console) flash

on and off for the duration of the
alarm. After 4 minutes (or when you
disarm the alarm) the lights stop flash-

ing and remain on.

If you arm the system to give an exit

delay, Wall Switch Modules set to the

same Housecode and Unit Code as the

Console turn on during the exit count-
down time. You can also control Wall

Switch Modules set to this code from

the [LIGHT ON] and [LIGHT OFF]

buttons on the HT544 and KF574

Remote Controls or from the

[SECURITY LIGHT] buttons on the

SH624 Remote Control.

Choose a light which is presently con-

trolled by a wall switch.

Turn off the power at the circuit

breaker panel or fuse box. Replace the

wall switch with Wall Switch Module,
Model No. WS467 (sold separately).
Set the House and Unit Code on the

Wall Switch Module to the same letter

and number as the Console.

13

Smarthome.com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com

Advertising