Action tab, Options tab – SMC Networks SMCWUSBT-G User Manual
Page 22
Chapter 3: Utility Configuration
15
Action Tab
Use the Action menu to access the Utility tools:
1.
Enable/Disable Radio:
Enable or disable the
RF Signal on all Atheros station reference
designs.
2.
Enable/Disable Tray Icon:
Enable or disable
the tray icon
.
3.
Manual LEAP Login:
Log in to LEAP manually,
if LEAP is set to manually prompt for user name
and password on each login.
4.
Reauthenticate:
Re-authenticate to a
LEAP-configured access point.
5.
Exit:
Exit the Utility application.
Options Tab
To change the display settings, choose Options > Display Settings from the menu.
Display Settings:
1.
Signal Strength Display Units:
Set the units
used when displaying signal strength:
percentage (%) or dBm.
2.
Refresh Interval:
Use the up/down arrows to
set the display refresh interval in seconds.
3.
Data Display:
Set the display to cumulative or
relative:
Relative:
displays the change in
statistical data since the last update.
Cumulative:
displays statistical data
collected since opening the profile.