SMC Networks SMCWUSBT-G - Manual (Page 31)

Wireless USB 2.0 Adapter
24
Infrastructure (Access Point) Mode Profile Configuration
To configure a profile in infrastructure (access point) mode, change the Network Type in the Advanced
tab. For access point mode, modify the settings:
„
Transmit Power Level
„
Power Save Mode
„
802.11b Preamble (if using 802.11b)
„
Wireless Mode
„
802.11a Authentication Mode (if using 802.11a)
Ad Hoc Mode
In ad hoc mode, a wireless network adapter works within an independent basic service set
(IBSS), as illustrated here. All stations communicate directly with other stations without using
an access point (AP)
.
Ad Hoc Mode Profile Configuration
To configure a profile in ad hoc mode, change the Network Type in the Profile Management's
Advanced tab. For ad hoc mode, modify the settings:
„ Network Name (on General Tab)
„ Transmit Power Level
„ 802.11b Preamble (if using 802.11b)
„ Wireless Mode When Starting an Ad Hoc Network