SMC Networks SMCWUSBT-G - Manual (Page 28)

Chapter 3: Utility Configuration
21
Edit the fields in the Security tab of Profile Management to configure the profile. To define the security
mode, select the radio button of the desired security mode. Make sure to also edit the General and
Advanced tabs.
WPA Enables the use of Wi-Fi Protected Access (WPA).
Choosing WPA opens the WPA EAP drop-down menu. The options
include:
• EAP-TLS
• EAP-TTLS
• PEAP
(EAP-GTC)
• PEAP
(EAP-MSCHAP V2)
• LEAP
WPA
Passphrase
Enables WPA Passphrase security.
Click on the Configure button and fill in the WPA Passphrase.
802.1x Enables 802.1x security. This option requires IT administration.
Choosing 802.1x opens the 802.1x EAP type drop-down menu. The
options include:
• EAP-TLS
• EAP-TTLS
• PEAP
(EAP-GTC)
• PEAP
(EAP-MSCHAP V2)
• LEAP
If the access point that the wireless adapter is associating to has WEP
set to Optional and the client has WEP enabled, make sure that Allow
Association to Mixed Cells
is checked on the Security Tab to allow
association.
Pre-Shared Key
(Static WEP)
Enables the use of pre-shared keys that are defined on both the access
point and the station.
To define pre-shared encryption keys, choose the Pre-Shared Key radio
button and click the Configure button to fill in the Define Pre-Shared
Keys window.
If the access point that the wireless adapter is associating to has WEP
set to Optional and the client has WEP enabled, make sure that Allow
Association to Mixed Cells
is checked on the Security Tab to allow
association.
None No security (not recommended).