Connect the power adapter, Connect the power adapter -7, 7 connect the power adapter – SMC Networks SMCWBR14S-N2 User Manual
Page 33
Advertising
C
ONNECT
THE
S
YSTEM
2-7
Connect the Power Adapter
Plug the power adapter into the power socket on the back panel of the
Barricade, and the other end into a power outlet.
Check the power indicator on the front panel is lit. If the power indicator is
not lit, refer to “Troubleshooting” on page A-1.
In case of a power input failure, the Barricade will automatically restart and
begin to operate once the input power is restored.
Advertising