Remote management, Remote management -14, 14 remote management – SMC Networks SMCWBR14S-N2 User Manual

Page 66

Advertising
background image

C

ONFIGURING

THE

B

ARRICADE

4-14

Remote Management

By default, management access is only available to users on your local
network. However, you can also manage the Barricade from a remote host
by entering the IP address of a remote computer on this screen. Check the
Enabled

check box, and enter the IP address of the Host Address and

click SAVE SETTINGS.

Note:

If you check Enable and specify an IP address of 0.0.0.0, any
remote host can manage the Barricade.

For remote management via WAN IP address you need to connect using
port 8080. Simply enter WAN IP address followed by :8080, for example,
211.20.16.1:8080.

Advertising