SMC Networks SMCWBR14S-N2 - Manual (Page 90)

C
ONFIGURING THE
B
ARRICADE
4-38
Push Button Configuration (PBC) Method
To achieve successful WPS connection, you can use one of the following
ways: (1) push and hold the WPS button on your Barricade, or (2) click the
Start PBC button on this screen.
1. Power on your network devices such as an access point and client
network devices.
2. Press the WPS button for 4 seconds, or click the Start PBC button on
the screen.
3. Press the WPS button or click the PBC button on your client devices
of your network.
Note:
This connection procedure must be done within 2 minutes after
pressing the WPS button on the Barricade.