Mounting.to.shop.floor notice – Woodstock SHOP FOX M1113 User Manual
Page 15
-13-
Model M1113 (Mfg. Since 2/08)
SE
TU
P
Although not required, we recommend that you mount
your new machine to the floor. Because this is an
optional step and floor materials may vary, floor mount-
ing hardware is not included. Generally, you can either
bolt your machine to the floor or mount it on machine
mounts. Both options are described below. Whichever
option you choose, it will be necessary to use a precison
level to level your machine.
Bolting.to.Concrete.Floors
Lag shield anchors with lag bolts and anchor studs
(
Figure.7) are two popular methods for anchoring an
object to a concrete floor. We suggest you research the
many options and methods for mounting your machine
and choose the best that fits your specific application.
Figure.8 shows the mounting locations for this machine.
Mounting.to.Shop.Floor
NOTICE
Anchor.studs.are.stronger.and.more.permanent.alter-
natives.to.lag.shield.anchors;.however,.they.will.stick.
out.of.the.floor,.which.may.cause.a.tripping.hazard.if.
you.decide.to.move.your.machine.at.a.later.point..
Figure.7. Typical fasteners for mounting
to concrete floors.
Lag Screw and Anchor
Anchor Stud
Figure.8. Location of machine base
mounting locations.
Base Mounting Locations
(3 of 4 shown)