Sprint Nextel Sprint PCS Connection Card PC-5740 - Manual (Page 26)

18 Section 1C: Installing the Sprint PCS Connection Card
Inserting and Removing the Sprint PCS
Connection Card
Inserting the Sprint PCS Connection Card
Before you insert the Sprint PCS Connection Card, you must first
install the Sprint PCS Connection Manager Software.
Once you have completed the software installation procedure,
you may insert your card into your computer’s PC Card slot. The
Sprint label should be facing up and the 68-pin connector, located
at the end of the card, should be inserted directly into the
computer’s PC Card slot.
Note: The Sprint PCS Connection Card should fit snugly, but you should
be able to insert or remove it easily from your computer’s PC Card slot.
A portion (the black section) of the card will remain outside the PC
Card slot. This section contains the card’s antenna and the LED
(light emitting diode). Because the card is not entirely contained
in your computer’s PC Card slot, it is important to remove the card
when transporting your notebook or Tablet PC.
Sprint_PC5740 (083105).qxd 9/23/2005 3:41 PM Page 18