Enabling ethernet, To enable the ethernet connection, 2 click the device manager tab – Sony PCV-L640 User Manual
Page 39: 4 click properties, 5 click enable device and then click ok, 6 click close
Advertising
Enabling Ethernet
39
Enabling Ethernet
Your computer comes with a preinstalled Ethernet interface. To enable faster
startup, your computer ships with this function disabled. You may, however,
enable Ethernet connectivity by following the instructions below.
To enable the Ethernet connection:
1
Right-click My Computer on the desktop and select Properties.
2
Click the Device Manager tab.
3
Select “Realtek RTL8139 (A/B/C/8130) PCI Fast Ethernet NIC” under the
Network Adapters category.
4
Click Properties.
5
Click Enable Device and then click OK.
6
Click Close.
Advertising