Calibrating the appropriate settings, Automatically (auto calibration), Calibrating the appropriate settings automatically – Sony HT-7100DH User Manual

Page 29: Auto calibration), Before you perform auto calibration

Advertising
background image

29

US

D:\CANNES\SONY_HA\JOB 2007\IM\HT-7100DH\US_HT-7100DH_data\US03CON_HT-7100DH-
U.fm

masterpage: Right

HT-7100DH

3-093-550-11 (1)

Getting Star

ted

7: Calibrating the
appropriate settings
automatically

(AUTO CALIBRATION)

This receiver is equipped with D.C.A.C.
(Digital Cinema Auto Calibration)
Technology which allows you to perform
automatic calibration as follows:
• Check the connection between each speaker

and the receiver.

• Adjust the speaker level.
• Measure the distance of each speaker to your

listening position.

You can also adjust the speaker levels and
balance manually. For details, see
“8: Adjusting the speaker levels and balance
(TEST TONE)” (page 33).

Before you perform the auto calibration, set up
and connect the speakers (page 16, 17).
• The AUTO CAL MIC jack is used for the

supplied optimizer microphone only. Do not
connect other microphones to this jack.
Doing so may damage the receiver and the
microphone.

• During the calibration, the sound that comes

out of the speakers is very loud. Pay
attention to the presence of children or to the
effect on your neighborhood.

• Perform the auto calibration in a quiet

environment to avoid the effect of noise and
get a more accurate measurement.

• If there are any obstacles in the path between

the optimizer microphone and the speakers,
the calibration cannot be performed
correctly. Remove any obstacles from the
measurement area to avoid measurement
error.

Notes

• The Auto Calibration function does not work when

headphones are connected.

• If the Muting function is on when we perform Auto

Calibration, it will turn off automatically.

1

Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack on the front panel.

2

Set up the optimizer microphone.

Place the optimizer microphone at your
listening position. Use a stool or tripod so
that the optimizer microphone remains at
the same height as your ears.

Tip

When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.

Before you perform Auto
Calibration

? / 1

AUTO CAL MIC

SPEAKERS

(OFF/A/B/A+B)

PHONES

VIDEO 3 IN/PORTABLE AV IN

VIDEO

L AUDIO R

MEMORY/

ENTER

TUNING
MODE

TUNING

2CH

A.F.D.

MOVIE

MUSIC

AUTO CAL

MUTING

DISPLAY

INPUT MODE

INPUT SELECTOR

MASTER VOLUME

MULTI CHANNEL DECODING

Optimizer microphone

Advertising