Video, Tuner – Sony HT-7100DH User Manual

Page 79

Advertising
background image

79

US

D:\CANNES\SONY_HA\JOB 2007\IM\HT-7100DH\US_HT-7100DH_data\US07REM_HT-7100DH-
U.fm

masterpage: Right

HT-7100DH

3-093-550-11 (1)

Ad
diti

on
al

I

n

fo

rmatio

n

Dolby Digital or DTS multi channel
sound is not reproduced.

• Check that the DVD, etc. you are playing

is recorded in Dolby Digital or DTS
format.

• When connecting the DVD player, etc., to

the digital input jacks of this receiver,
check the audio setting (the settings for the
audio output) of the connected component.

The MULTI CHANNNEL DECODING
lamp does not light up in blue.

• Check that the playback component is

connected to a digital jack and the input is
selected properly on this receiver.

• Check whether the input source of the

software being played back corresponds to
the multi channel format.

• Check whether the setup on the playback

component is set to multi channel sound.

Recording cannot be carried out.

• Check that the components are connected

correctly.

• Select the source component using the

input buttons.

Video

There is no picture or an unclear
picture appears on the TV screen or
monitor.

• Select the appropriate input using the input

buttons.

• Set your TV to the appropriate input mode.
• Move your audio components away from

the TV.

• Assign the component video input

correctly.

• Assign the composite video input to

DMPORT input correctly.

• Depending on the DIGITAL MEDIA

PORT adapter, video output may not be
possible.

The source image input to the HDMI
jack on the receiver is not output from
the TV.

• Check the HDMI connection.
• Depending on the playback component,

you may need to set up the component.
Refer to the operating instructions
supplied with the each component.

Recording cannot be carried out.

• Check that the components are connected

correctly.

• Select the source component using the

input buttons.

Tuner

The FM reception is poor.

• Use a 75-ohm coaxial cable (not supplied)

to connect the receiver to an outdoor FM
antenna as shown below. If you connect
the receiver to an outdoor antenna, ground
it against lightning. To prevent a gas
explosion, do not connect the ground wire
to a gas pipe.

Receiver

To ground

Ground wire
(not supplied)

Outdoor FM antenna

AM

ANTENNA

Receiver

continued

Advertising