Sony HT-7100DH - Manual (Page 30)

30 US
D:\CANNES\SONY_HA\JOB 2007\IM\HT-7100DH\US_HT-7100DH_data\US03CON_HT-7100DH-
U.fm masterpage: Left
HT-7100DH
3-093-550-11 (1)
Press AUTO CAL.
The following appears on the display.
A.CAL [5] t A.CAL [4] t A.CAL [3] t
A.CAL [2] t A.CAL [1]
The measurement process will take a few
minutes to complete.
The table below shows the display when
measurement starts.
* The corresponding speaker indicator lights up in
the display during measurement.
When measurement ends, “COMPLETE”
appears on the display and the settings are
registered.
When you have finished
Disconnect the optimizer microphone from the
receiver.
Notes
• Auto Calibration cannot detect the sub woofer.
Therefore, all sub woofer settings will be
maintained.
• You cannot select Auto Calibration when
headphone is connected.
Tips
• When Auto Calibration starts:
– Stand some distance from the speakers and the
listening position to avoid measurement failure.
This is because test signals are output from the
speakers during measurement.
– Avoid making noise to get a more accurate
measurement.
• The Auto Calibration function will be canceled
when you do the following during the
measurement process:
– Press ?/1, input buttons or MUTING.
– Change the volume level.
– Press AUTO CAL again.
Performing Auto Calibration
G
f
F
g
GUIDE DISPLAY
MEMORY
-/--
> 10
DVD
m M
. >
TV
VIDEO 1 VIDEO 2 VIDEO 3
SYSTEM STANDBY
DVD
TUNER SA-CD//CD TV SAT
AUX DMPORT RECEIVER
? / 1 1
O
CLEAR ENTER 0//10
8 7
4
1 2 3
6
9
5
RM SET UP AV ?/ /1
SLEEP
CATEGORY
MODE AUTO CAL
2CH A.F.D. MOVIE MUSIC
MUTING
TV VOL
MASTER VOL
TV CH
PRESET
REPLAY
– CATEGORY +
ADVANCE
TUNING + TUNING –
DISC SKIP
RETURN//
EXIT MENU
OPTIONS
TOOLS
D.TUNING AUTO
CAL
Input
buttons
?/1
switch
MUTING
MASTER
VOL +/–
Measurement for Display
Environment noise level NOISE.CHK
Speaker connection MEASURE and SP
DET. appears
alternately*
Speaker level MEASURE and
GAIN appears
alternately*
Speaker distance MEASURE and
DISTANCE appears
alternately*