Stored with, At&w, E with – Siemens TC63 User Manual
Page 34: Tc63 at command set
TC63 AT Command Set
2.3 AT&W
s
TC63_ATC_V00.490
Page 34 of 501
5/24/05
Confidential / Draft - Do not copy
2.3
AT&W Stores current configuration to user defined profile
stores the currently set parameters to a user defined profile in the non-volatile memory.
Syntax
Parameter Description
[0]
Number of profile
Notes
• The user defined profile will be restored automatically after power-up. Use
to restore user profile and
to restore factory settings. Until the first use of
•
stores all global settings and the current local settings of the interface, on which the command is exe-
cuted.
• A list of parameters stored to the user profile can be found in Section
.
Exec Command
AT&W
[
]
Response(s)
OK
ERROR/+CME ERROR <err>
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
V.250
!
%
%
%
%
%
%
!
%
!
<value>
(num)