SMC Networks SMC8013WG - Manual (Page 11)

4.2 | Configuring Windows 2000
1. Access your Network settings by clicking
[Start], choose [Settings], and then
select [Control Panel]
2. In the Control Panel, locate and double-
click the [Network and Dial-up
Connections] icon
3. Locate and double-click the [Local Area
Connection] icon for the Ethernet
adapter that is connected to the
Gateway. When the Status dialog box
window opens, click the [Properties]
button.
4. On the [Local Area Connection]
Properties box, verify the box next to
Internet Protocol (TCP/IP) is checked.
Then highlight the Internet Protocol (TCP/IP), and click the Properties button.
5. Select Obtain an IP address automatically to configure your computer for DHCP. Click
the [OK] button to save this change and close the Properties window.
6. Click the [OK] button again to save these new changes.
7. Reboot your PC.