SMC Networks SMC8013WG - Manual (Page 8)

CHAPTER 3 | Installation
The EZ Connect™ Wireless Cable Modem Gateway can be installed in any location where you
have cable internet access, and the cable internet service provider has approved the EZ
Connect™ Wireless Cable Modem Gateway. To confirm you meet these 2 criteria points, please
contact your local ISP.
For general installation please follow the guidelines outlined below to best performance:
• Keep the Wireless Cable Modem Gateway away from any heating devices.
• Do not place the Wireless Cable Modem Gateway in a dusty or wet environment.
• For optimum wireless performance, install the Wireless Cable Modem Gateway away
from other electronic devices, such as Monitors / TV / 2.4GHz Cordless Phones. These
devices can hamper your wireless throughput and distance.
The EZ Connect™ Wireless Cable Modem Gateway can be positioned two ways, horizontal and
vertical.
To install the Wireless Cable Modem in a vertical position, on the left side of the device, when
looking at the LEDs – there is a built-in base stand. Pull out the stand out and turn it 90 degrees
and position the gateway on its side. See the different Install positions below:
Vertical Base
Stand
Horizontal Install
Vertical Install