SUPER MICRO Computer SUPERO H8QG6+-F - Manual (Page 3)

Preface
iii
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
H8QG6/i+-F serverboards. The H8QG6+-F serverboard includes onbard SAS2
support while the H8QGi+-F does not.
The H8QG6/i+-F serverboard is based on the AMD® SR5690/SP5100 chipset and
supports four AMD Socket G34 type processors with up to 256 GB of ECC/Non-
ECC UDIMM or up to 1 TB of ECC RDIMM DDR3-1600/1333/1066 Mhz SDRAM
memory. The only difference between the two serverboards is that the H8QG6+-F
serverboard has SAS2 capability and the H8QGi+-F does not.
Please refer to the motherboard specifi cations pages on our web site for updates on
supported processors ( http://www.supermicro.com/aplus/ ). This product is intended
to be professionally installed.
Manual Organization
Chapter 1 includes a checklist of what should be included in your motherboard
box, describes the features, specifi cations and performance of the motherboard
and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices. Read this
chapter when installing the processor(s) and memory modules and when installing
the motherboard in a chassis. Also refer to this chapter to connect the hard disk
drives, the various ports, and the power and reset buttons and the system LEDs.
If you encounter any problems, see Chapter 3, which describes troubleshooting
procedures for the video, the memory and the setup confi guration stored in CMOS.
For quick reference, a general FAQ (Frequently Asked Questions) section is
provided. Instructions are also included for contacting technical support. In addition,
you can visit our web site for more detailed information.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Code Messages.
Appendix B lists BIOS POST Checkpoint Codes.