3 frequently asked questions – SUPER MICRO Computer SUPERO H8QG6+-F User Manual

Page 57

Advertising
background image

3-3

Chapter 3: Troubleshooting

Note: Not all BIOS can be fl ashed depending on the modifi cations to the boot

block code.

3. If you still cannot resolve the problem, include the following information when

contacting us for technical support:

Motherboard model and PCB revision number

BIOS release date/version (this can be seen on the initial display when your

system fi rst boots up)

System confi guration

An example of a Technical Support form is posted on our web site.

Distributors: For immediate assistance, please have your account number ready

when contacting our technical support department by e-mail.

3-3 Frequently

Asked

Questions

Question: What type of memory does my motherboard support?

Answer: The H8QG6/i+-F serverboard supports up to thirty-two (32) single/

dual/tri/quad channel DIMM slots supporting up to 1 TB of registered ECC

or 256 GB of unbuffered ECC/non-ECC DDR3-1600/1333/1066 Mhz speed,

1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size SDRAM memory (or up to 256

GB with a single CPU installed). Both single and dual channel confi guratiosn are

supported. See Section 2-4 for details on installing memory.

Question: How do I update my BIOS?

Answer: It is recommended that you not upgrade your BIOS if you are not

experiencing problems with your system. Updated BIOS fi les are located on our

web site. Please check our BIOS warning message and the information on how to

update your BIOS on our web site. Also, check the current BIOS revision and make

sure it is newer than your current BIOS before downloading.

Select your motherboard model on the web page and download the corresponding

BIOS fi le to your computer. Unzip the BIOS update fi le, in which you will fi nd the

readme.txt (fl ash instructions), the afudos.exe (BIOS fl ash utility) and the BIOS

image (xxx.rom) fi les. Copy these fi les to a bootable fl oppy disk, insert the disk

into drive A and reboot the system. At the DOS prompt after rebooting, enter the

command "fl ash" (without quotation marks) then type in the BIOS fi le that you want

to update with (xxxx.rom).

Question: What's on the CD that came with my motherboard?

Answer: The supplied compact disc has quite a few drivers and programs that will

greatly enhance your system. We recommend that you review the CD and install the

applications you need. Applications on the CD include chipset drivers for Windows

and security and audio drivers.

Advertising
This manual is related to the following products: