Specialized Speedzone Comp CR2302 User Manual

Page 10

background image

• See your authorized Specialized

dealer if you have any trouble
installing or maintaining your

• Clean the unit with a mild detergent

and a soft dry cloth. Never use any
kind of solvent or alcohol.

• The SpeedZone Comp computer is

intended for use on bicycles only
and should not be used on any
motorized vehicle.

Specialized cycling computers are
guaranteed to be free from defects
in materials and/or workmanship
(excluding battery) for a period of
two years from the date of purchase.
Specialized will at its option, repair
or replace your defective computer.

To receive warranty service send the

unit, a copy of the sales receipt and
a brief description of the problem to:

Specialized Bicycle Components Inc.
15130 Concord Circle
Morgan Hill, CA. 95037
Attn: Product Services/

Computer Warranty


Display is blank:

Change the battery or press the AC
button on the bottom of the case

Display shows partial digits:

Press the AC button on the bottom
of the case.

Speed/distance not recording:

Check sensor/magnet alignment.
Make sure that the sensor is no more
than 1/16" (2mm) from the magnet.

Entire screen is dark:

Did you leave the bike parked in the
hot direct sun when it was parked?
If so, move the bike to the shade.
The data will be OK.

Computer moves on handlebar:

Tighten mount or add sizing straps
to improve fit on handlebar.

• Pay attention to traffic and road

conditions at all times. Your first
obligation is to be attentive and
to ride safely.

• Keep your computer in good shape

and use it safely.

• Do not expose it to direct sunlight

except when you are riding.

• Do not disassemble it.
• Make sure the magnet and

the transmitter are well aligned.
Check them regularly.

• Keep the computer and all of its

components tightly attached, and
check them regularly. If any of the
components come loose, it could
become tangled in your spokes
and cause an accident.


01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 18