SMC Networks SMC8014W-G User Manual
Page 43
Advertising
![background image](/manuals/140889/43/background.png)
3. Click the [Apply] button to save your changes
4. On the Side Navigation bar, click on the [Access Control] link
5. Enable LAN clients that will access the IPSec VPN by adding them to the VPN Access
List. There are two ways to add a LAN client to the VPN Access List. Either select the
radio button next to an [Auto-Learned CPE Device] or manually enter the LAN clients
MAC address in the [Manually-Added CPE Devices] section, then select [Add]
6. On the Side Navigation bar, click on the [IPsec Tunnel Configuration] link
NOTE: There is a VPN Log on this page that displays VPN event messages.
7. Click on the [Add] button to configure the IPSec VPN
Advertising