SMC Networks SMC8014W-G - Manual (Page 44)

a. Either the Gateway’s Private LAN IP address or Public LAN IP address can be
configured as the end point for the VPN tunnel. Select either [Protect Private
Lan] or [Protect Public Lan] to enable the entire Private or Public LAN to be
part of the VPN tunnel and the respective Gateway LAN IP address will
populate the [Intranet Address] and [Intranet Subnet Mask] fields.
b. Enter the [Local ID] which must match the “Remote ID” of the remote VPN end
point.
c. Enter the [Remote Gateway ID] which must match the “Local ID” of the remote
VPN end point.
d. Enter the [Remote Gateway Address]
e. Enter the [Pre-shared Key] which must match the “Pre-shared Key” value of
the remote VPN end point.
f. Enter the [IKE Life Duration] value