Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 142)

Step by Step
Operating the Telephone with the optiPoint display module
142
Press the display key OK to terminate the process im-
mediately. You can then replace the handset or redial.
or Transfer on hangup
Prerequisite: Transfer on hangup is activated
( page 112).
]
or
n
Replace the handset or press the speakerphone key if
in speakerphone mode. A connection is established be-
tween the other two stations.
Call Control
Mon 07/03/05 11:34AM
00:24
00:24
Joining... done
Bill Smith
987654321
Jane Brown
123456789
OK