Siemens HIPATH 8000 OPTIPOINT410 - Manual (Page 56)

Step by Step
Operating the Telephone with the Display
56
Using Repdial Keys
The Repertory Dialing function is similar to selected
dialing. However, it can also incorporate dialing control
functions at any point within the repertory dialing se-
quence. The HiPath 8000 automatically detects wheth-
er the digits represent an IP address, a number, or a
URL.
Procedure for programming Repdial keys, see
page 119.
Control Function Action During Dialing
OK <OK> Any characters following this
control function are sent imme-
diately after the call has been
answered, and are sent as DT-
MF.
Pause <PA> Waits 3 seconds before sending
any characters following this
control function.
Consultation <CS> Establish a consultation call at
this point.
Clear <CL> Clear the current call at this
point.