Changing the window design of sony software, To change the window design, 2 click ui design selector – Sony PCV-LX700 User Manual
Page 24: 3 click << or >> and select the desired design, 4 click apply, Autoalert e-mail notification system
VAIO Slimtop™ LCD Computer User Guide
24
The next time the device is connected and turned on, the assigned application will
launch automatically.
Changing the Window Design of Sony Software
To change the window design
1
Click the Start button, point to Settings, and then point to Control Panel.
2
Click UI Design Selector.
3
Click << or >> and select the desired design.
4
Click Apply.
5
The “UI Design Selector” window design changes. The window design for
your Sony software will match the “UI Design Selector” window.
6
To try another selection, click << or >> and then click OK.
7
The UI Design Selector closes and the Sony software window design
displays.
AutoAlert E-mail Notification System
VAIO Action Setup also enables you to set up your computer to notify you with
an
Information LED when new mail arrives in your e-mail mailbox. The
Information LED turns red to indicate that new e-mail has arrived. For this
AutoAlert E-mail Notification System to work, you must use Microsoft
®
Outlook
®
Express as your default e-mail software, and you must have an Internet
Service Provider with dial-up capabilities set up.
As an alternative, you can program your AutoAlert E-mail Notification System to
set the Information LED to turn on when it has successfully completed the task of
dialing up and connecting to receive mail. In this case, the Information LED turns
on to indicate that your e-mail account has been accessed successfully, regardless
of whether or not you have mail; this works with Microsoft
Outlook Express.
✍
You may use the feature with UI Design Selector-compatible software only.
✍
The e-mail software you choose to use with PPK must be set as your default e-mail
software.