Sony PCV-LX700 - Manual (Page 62)

VAIO Slimtop™ LCD Computer User Guide
62
On Moisture Condensation
If your computer is brought directly from a cold location to a warm one, moisture
may condense inside your computer. In this case, allow at least an hour before
turning on your computer. If any problem occurs, unplug your computer, and
contact your Sony Service Center.
On Upgrading the System
❑ The procedures described in the online manual, Upgrading and Maintaining
Your VAIO
®
Computer assume familiarity with the general terminology
associated with personal computers and with the safety practices and
regulatory compliance required for using and modifying electronic
equipment.
❑ Disconnect the system from its power source and from any networks,
modems, or telecommunications links before you open the system or follow
any of the procedures described in the online manual, Upgrading and
Maintaining Your VAIO
®
Computer. Failure to do so may result in personal
injury or equipment damage.
❑ Electrostatic discharge (ESD) can damage disk drives, add-in cards, and
other components. Follow the procedures described in the online manual,
Upgrading and Maintaining Your VAIO
®
Computer, only at an ESD
workstation. If such a station is not available, do not work in a carpeted area,
and do not handle materials that produce or hold static electricity
(cellophane wrappers, for example). Ground yourself by maintaining contact
with an unpainted metal portion of the chassis while performing the
procedure.
❑ When removing a slot cover, be careful not to damage components on the
system board or add-in cards. You may need to temporarily remove add-in
cards that are next to the slot cover you want to remove.
On Handling an LCD Display
❑ Do not leave the LCD directly facing the sun for a long period of time as it
can damage the LCD.
❑ Do not scratch the LCD or exert pressure on it. This could cause
malfunction.