Sony DVP-CX860 User Manual

Page 75

Advertising
background image

75

Settings and Adjustments

x

MPEG

Selects the MPEG audio signals to be output via the
DIGITAL OUT OPTICAL and COAXIAL connectors. You
cannot select this item when you set “DIGITAL OUT” to
“OFF.”
• PCM: when the player is connected to an audio

component lacking a built-in MPEG decoder. If you
play MPEG audio sound tracks, the player outputs
stereo signals via the DIGITAL OUT OPTICAL and
COAXIAL connectors.

• MPEG: when the player is connected to an audio

component having a built-in MPEG decoder.
If the player is connected to an audio component
lacking a built-in MPEG decoder, do not set this.
Otherwise, when you play the MPEG audio sound
track, a loud noise or no sound will come out from the
speakers, affecting your ears or causing the speakers to
be damaged.

x

DTS

Selects the DTS signals to be output via the DIGITAL OUT
OPTICAL and COAXIAL connectors. You cannot select
this item when you set “DIGITAL OUT” to “OFF.”
• OFF: when the player is connected to an audio

component lacking a built-in DTS decoder.

• ON: when the player is connected to an audio

component having a built-in DTS decoder.
If the player is connected to an audio component
lacking a built-in DTS decoder, do not set this.
Otherwise, when you play the DTS sound track, a loud
noise or no sound will come out from the speakers,
affecting your ears or causing the speakers to be
damaged.

Setting the Digital Output Signal

Switches the methods of outputting audio signals when
you, connect 1. a digital component such as a receiver
(amplifier) having a digital connector, 2. an audio
component having a built-in decoder (Dolby Digital,
MPEG or DTS), 3. a DAT or MD via the DIGITAL OUT
OPTICAL or COAXIAL connector using an optical or
coaxial digital connecting cord. For connection details,
see pages 12 and 16.
When you select “ON,” set “DOLBY DIGITAL,” “MPEG”
and “DTS.”

x

DOLBY DIGITAL

Selects the Dolby Digital signals to be output via the
DIGITAL OUT OPTICAL and COAXIAL connectors. You
cannot select this item when you set “DIGITAL OUT” to
“OFF.”
• D-PCM (Downmix PCM): when you play Dolby Digital

sound tracks, the output audio signals are mixed down
to 2 channels. You can select whether the signals
conform to Dolby Surround (Pro Logic) or not by
making adjustments to the “DOWNMIX” item in
“AUDIO SETUP.”

• DOLBY DIGITAL: when the player is connected to an

audio component with a built-in Dolby Digital decoder.
If the player is connected to an audio component
lacking a built-in Dolby Digital decoder, do not set this.
Otherwise, when you play the Dolby Digital sound
track, a loud noise or no sound will come out from the
speakers, affecting your ears or causing the speakers to
be damaged.

Note

When you select “D-PCM,” set Virtual Enhanced Surround (VES)
to “OFF.” Otherwise, the player will not output signals from the
DIGITAL OUT OPTICAL or COAXIAL connector.

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:

DOLBY DIGITAL:
MPEG:

To set, press , then .
To quit, press .

OFF

STANDARD

DOLBY SURROUND

ON

D-PCM

PCM

DTS:

OFF

ENTER

DISPLAY

Advertising