Sony DVP-CX860 - Manual (Page 78)

78
Settings and Adjustments
VOL
1/u
Number
buttons
1 2 3
4 5 6
7 8 9
0
A
-/--
B C D ALL
DVD EDIT
MEGA
SORT FILE
LOAD
CD
TIME
1 2 3
4 5 6
7 8 9
0
A
-/--
B C D ALL
DVD EDIT
MEGA
SORT FILE
LOAD
CD
TIME
Controlling AV receivers (amplifiers) with
the remote
1
Slide the TV/DISC BROWSER/DVD switch to DVD.
2
Hold down ?/1, and enter your AV receiver’s
manufacturer’s code (see the table) using the
number buttons.
3
Release ?/1.
Code numbers of controllable AV receivers
(amplifier)
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
AV receiver (amplifier).
Manufacturer Code number
Sony 91 (default), 89
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
Controlling the AV receiver (amplifier)
When you set the TV/DISC BROWSER/DVD switch to
DVD, you can change the volume of the AV receiver
(amplifier) using VOL.
Note
Depending on the AV receiver (amplifier), you may not be able to
control your AV receiver (amplifier).
Controlling Your TV or AV Receiver (Amplifier) with the Supplied Remote
Set the TV/DISC
BROWSER/DVD
switch to DVD.
Set the TV/DISC
BROWSER/DVD
switch to DVD.