Controlling tvs with the remote, Settings and adjustments, Slide the tv/disc browser/dvd switch to tv – Sony DVP-CX860 User Manual
Page 77: Release ? / 1, You can
77
Settings and Adjustments
1
2
3
4
5
6
7
8
9
0
A
-/--
B
C
D
ALL
DVD
EDIT
MEGA
SORT
FILE
LOAD
CD
TIME
TV/VIDEO
ENTER
1
/u
Number buttons
VOL
ENTER
WIDE MODE
By adjusting the remote signal, you can control your TV
or AV receiver (amplifier) with the supplied remote.
Controlling TVs with the remote
1
Slide the TV/DISC BROWSER/DVD switch to TV.
2
Hold down ?/1, and enter your TV’s manufacturer’s
code (see the table) using the number buttons.
3
Release ?/1.
1/u
Number
buttons
Set the TV/DISC
BROWSER/DVD
switch to TV.
Controlling Your TV or AV Receiver (Amplifier) with the
Supplied Remote Z
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may be reset to the default setting. Reset the appropriate code
number.
Controlling the TV
When you set the TV/DISC BROWSER/DVD switch to
TV, you can control your TV using the buttons below.
By pressing
?
/1
TV/VIDEO
TV/DVD*
VOL
PROG
WIDE MODE
Number buttons
and ENTER
* If you connect the player to the TV via the SCART (EURO AV)
connectors, the input source for the TV is set to the player
automatically when you start playback or press any button
except for ?/1. In this case, press TV/DVD to return the input
to the TV.
Notes
• Depending on the TV, you may not be able to control your TV
or to use some of the buttons above.
• If you use number buttons to select the TV’s program position,
press - followed by the number buttons for two-digit
numbers.
Code numbers of controllable TVs
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
TV.
Manufacturer
Code number
Sony (default)
01
Grundig
11
Hitachi
24
Loewe
45
Nokia
15, 16, 69
Panasonic
17, 49
Philips
06, 07, 08
Saba
12, 13
Samsung
22, 23
Sanyo
25
Sharp
29
Telefunken
36
Thomson
43
Toshiba
38
1
2
3
4
5
6
7
8
9
0
A
-/--
B
C
D
ALL
DVD
EDIT
MEGA
SORT
FILE
LOAD
CD
TIME
TV/DVD
PROG
-
Set the TV/DISC
BROWSER/DVD
switch to TV.
You can
Turn the TV on or off
Switch the TV’s input source between
the TV and other input sources
Switch the TV’s input source between
the TV and CD/DVD player
Adjust the volume of the TV
Select the program position of the TV
Switch to or from the wide mode of a
Sony Wide TV
Select the program position of the TV