Connecting to a standard antenna – Sony VGC-VA10G User Manual
Page 40
40
Using Your VAIO Computer
Connecting to a standard antenna
You can connect your computer to an indoor/outdoor antenna system, using Option 1 or Option 2 from the previous section,
Connecting to standard cable access (CATV)
. Depending on the type of antenna system in your home, your
connection may require a VHF/UHF RF combiner/transformer (not supplied) to connect the computer and the indoor/outdoor
antenna system.
✍
If you are connecting to an indoor/outdoor antenna, you may need to reorient the antenna for best reception. Move the antenna cable away from other
power sources or connectors to reduce reception interference.
The computer is supplied with certain audio and video cables. Depending on your in-home cable access, you may require extra cables, adapters or
connection equipment.
To connect in terrestrial mode (Option 1)
1
Connect one end of a TV coaxial cable (1) (not supplied) to your antenna outlet (2). Connect the other end to a VHF/UHF
RF combiner/transformer (3) (not supplied).
2
Connect the coaxial cable feed connector (4) (supplied) to the VHF/UHF RF combiner/transformer (3).
3
Connect the TV coaxial cable (5) (supplied) from the feed connector (4) to the VHF/UHF port (6) on the computer.