Sony HK-PSU02 - Manual (Page 11)

1-5
MVE-8000A
Eject lever
Plug-in board
Plug-in board
Eject lever
Eject levers
Plug-in board
4. While the eject levers are kept open as shown in the
illustration, insert the plug-in board into the board
guide rails.
Name of option Name of board Slot on the front side
MKE-8040A DVP-30A board * 1 2, 3
* 1 : The DVP-30A boards are assigned to the following channels in
accordance with the slots to which the boards are inserted.
Slot Channel
2 CH1, CH2
3 CH3, CH4
5. While closing the eject levers in the direction of arrow,
push in the plug-in board.
6. Attach the plug-in board loose-proof assembly and the
front door assembly by reversing the installation steps
2, 3.