Sony DVD Rom/DVD Video - Manual (Page 27)

27
4.4.3 Density
To be able to process your label films optimally the
minimum film density has to be 3.0 in full tone.
4.4.4 Print
Sony DADC requires smooth, full-page screen printing
films (positive, right side reading, emulsion up) prepared
as follows:
4.4.4.1 Duplex/Triplex print
(half-tone print) with
Pantone colours
For duplex and triplex prints please use the following
angle codes: 0°, 15°, 45° or 75°. With other angle codes
a ‘moiré-free print’ is not provided.
4.4.4.2 Four-colour print –
Picture Disc
In order to achieve favourable printing results, we need
a compulsory colour copy such as Cromalin, Match-
print, Pressmatch or test print.
Please take into account that there may be colour devi-
ations from the original copies due to the different con-
sistency of the base.
4.4.4.3 Four-colour print –
High Definition
Picture Disc
In order to achieve favourable printing results, we need
a compulsory colour copy such as Cromalin, Match-
print, Pressmatch or test print.
However, for all colour prints, please bear in mind that
the base of the DVD consists of polycarbonate with a
reflective aluminium coating and therefore there
may be colour differences compared to the printwork
(paper/carton). If you need absolute confirmity of
colours of printed matter (printwork) and the DVD label
print, we advise you to preprint a full white base on the
DVD.
For Picture and/or High Definition Picture Disc printing,
Sony DADC can prepare four-colour separation/litho
production of the label films for you.
• Line width 34 l/cm
• Angle code 45°
• Max. density 15–85%
• Elliptic dot shape
• Line width 54 l/cm
• Angle codes:
cyan 75°
magenta 45°
yellow 0°
black 15°
or angle codes similar to the Hell and
Crossfield system.
• Density 15–85%
• Elliptic dot shape
• Line width 80 l/cm
• Angle codes:
cyan 75°
magenta 45°
yellow 0°
black 15°
or angle codes similar to the Hell and
Crossfield system.
• Registration marks to be centered only
as shown in diagram page 18/chapter 4.5.
4. Lableprinting