Sanyo Vizzon HT27546 - Manual (Page 11)

11
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
ANALOG AV CONNECTIONS
Switch off TV and external equipment before connecting
cables.
(Cables are not supplied.)
1 Connect game Audio Output (R/L) to the TV Audio
Input (R/L). Then connect game Video Output to the
TV Video Input.
2 Press POWER to turn on the TV, then turn on
external equipment.
3 To access Audio / Video inputs,
press the INPUT key to select
Video1.
CAMCORDER
VIDEO GAME
USING THE FRONT VIDEO AND AUDIO INPUT JACKS TO
CONNECT A VIDEO GAME OR OTHER EQUIPMENT
REMOTE CONTROL
3 2
1
■
“No Signal” will appear randomly on the screen when no signal is
detected at the VIDEO1 input jack.
■ Press the INPUT key after connecting cables to access the AV
inputs. There is NO need to tune to a blank channel.
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must run All
Channel Search twice before you can select the AV inputs.
What you will need for
connections:
Audio Video Cable – 1