Sanyo Vizzon HT27546 - Manual (Page 13)

13
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
➃
Recall Key—Select the first channel you want to
watch; then select another channel using the
NUMBER keys. Press RECALL to switch between the
channels.
NOTE: The RECALL key cannot toggle between a Digital
channel and an Analog channel. See TUNER (#6) key
description.
➄
Menu key—Press this key to display the on-screen
menu: Digital or Analog.
➅
Tuner Key—Use this key to toggle from one tuning
system to another, digital channels and analog
channels.
NOTE: The TUNER key is inactive when an external input is
selected (Video1, Video2, or Component2).
➆
Caption Key—Press to select analog or digital cap-
tioning. The Analog Caption modes are: CC1 ~ CC4,
Quikcap, and OFF. The Digital Caption modes are:
Digital CC1 ~ CC6, Quikcap, and OFF.
➇
Channel Scanning ((CH
▲ ▼ ) Keys—Press ▲ (up)
▼ (down) keys to tune to the next higher or lower
channel in the Channel Scan Memory database. The
scanning loop includes analog channels, digital chan-
nels, and all A / V inputs.
➈
Pix Shape Key—Use this key to change the video
display format. Available options depend on signal
received and the broadcast’s aspect ratio. They may
include:
PIX1, PIX2, and PIX3. See simulated TV
images below.
➉
Audio Key—Press to select the desired audio mode
(if available): DIGITAL: Main, Sub1, Sub2, Sub3, etc.;
ANALOG: Stereo, Mono, SAP.
Power Key—Press to turn DTV on or off.
Sleep Key—Press this key, then press the “0” key to
set the Sleep Timer. The desired time can be set from
30 minutes up to 3 hours in 30 minutes increments.
Sleep Timer will switch off the DTV automatically.
NOTE: The Sleep Timer cancels when the DTV is turned off
or if a power failure occurs.
Mute Key—Press once to minimize the volume. Press
again to restore.
NOTE: This key will not mute sound from the audio out
jacks
.
Enter Key—Press this key to select an option from
the menu system, when required.
Cursor
▲ (up) ▼ (down) keys—Press these keys to
move the cursor up and down within the menu.
Cursor
<
(left)
>
(right) keys—Press these keys to
move the cursor left and right within the menu.
Exit Key—Press this key to exit from the menu
system.
Volume (VOL – +) Keys—Press the – – + + keys to adjust
volume. The screen displays a left or right red arrow
that blinks as many times as you press the Vol –
– + +
keys.
Reset Key—Press twice to restore factory settings.
The DTV will automatically start Channel Search and
clear all customized settings.
NOTE: The Reset Function includes a channel search.
Current Digital and Analog channel databases will be
deleted and new ones created by the All Channel Search
process. To receive Digital Cable channels, see page 15 for
DTV Cable Search.
These features will reset to factory defaults:
• Picture / Sound Adjustments: Color, Tint,
Contrast, Brightness, Sharpness, and Tone
• Channel Memory—Digital /Analog channel
databases will be replaced
• Analog Audio to Stereo
• Captioning to OFF
• V-Guide to OFF
• Menu Language to English
• Sleep Timer to OFF (if previously set)
• Any Video mode to TV mode
If desired, personal settings can be made again
using the menu options.
11
PIX2
Black colored borders
appear at the top and
bottom of the screen.
PIX3
Enlarges image (some of
the top and bottom may
be clipped).
12
13
14
16
15
17
18
PIX1
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must run All
Channel Search twice before you can select the AV inputs.