Sanyo Vizzon HT27546 - Manual (Page 17)

17
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
To delete channels in the database
3 Use the CHANNEL (CH
▲▼) keys or 0 ~ 9 keys to
select desired channel. HINT: Press the TUNER key
to switch between Digital and Analog Channel Scan
memories.
4 Press the ENTER key to delete the channel. The
display will change to “deleted.”
NOTES:
“Delete?” will appear beside the channel number if the selected
channel is already in the Channel Scan memory.
Use the number keys to tune to active channels not in the
Channel Scan Memory list.
CH (CHANNEL) SCAN MEMORY
Channel Scan Memory is a database of active channels
that you can scan through using the CHANNEL SCAN
CH
▲ (up) CH ▼ (down) keys. This list can be customized
by deleting and/or adding channels.
1 Press the MENU key to display the Main menu.
2 Use the CURSOR
▲▼ keys to highlight CH Scan
Memory. Use the CURSOR > to select the channel
number area.
■
When a digital channel is deleted, all of that channel’s sub-channels
are deleted as well.
■
Only previously deleted digital channels can be added back to the
Channel Scan Memory.
■
Channels deleted from Channel Scan Memory can be tuned using
the number keys.
■
If one digital sub-channel is added back to the Channel Scan
Memory all of that channel’s sub-channels will be added back.
■
If the last remaining digital channel is deleted, the entire previous
Channel Scan Memory list will be restored automatically.
■
If the last remaining analog channel is deleted (cable or off-air
channel), ALL analog channels (cable or off-air) will be restored auto-
matically, regardless of the previous Analog Channel Scan Memory
list.
MENU LANGUAGE
1 Press the MENU key to display the Main menu.
2 Use the CURSOR ▲▼ keys to highlight Menu
Language.
3 Use the CURSOR < > keys to select English,
Español, or Français.
4 Press the EXIT key to return to normal TV viewing.
After 3 seconds the TV
screen will display “Add?”
After 3 seconds
the TV screen will
display “Delete?”
To Add a channel not in the database
3 Use the numerical 0 ~ 9 keys to select the desired
channel number. “Add?” will appear beside the
channel number. HINT: Press the TUNER key to
switch between Digital and Analog Channel Scan mem-
ories.
4 Press the ENTER key to add the channel. The display
will change to “Added.”
When you have finished adding and/or deleting channels,
press the EXIT key to return to normal TV viewing.