Sanyo VCC-WD8575P - Manual (Page 19)

English 18
Adjusting Synchronization Error
For accessing the MAIN MENU, see page 13 – 14.
By default, the synchronization adjustment for the camera is performed internally (INT). However, you must make adjustments
in the Line Lock (L-L) Setting screen, if the monitor screen seems out of sync after switching over among multiple cameras
using AC 24 V.
• If using this camera as the second or subsequent camera, adjust the roll using this setting.
• If using this camera as the first camera, adjust the roll using the phase adjusters on the second and subsequent cameras.
Note: The Line Lock setting is not available for DC 12 V operation.
1 1 1 1
Adjusting Synchronization (0 – 524). • Make adjustments so that the vertical synchronization of the
monitor screen does not move up or down.
2 2 2 2 Set “MENU” to “END” and press the SET button.
R Finishes the setting screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
L-L SETTING (Line Lock)
SET
SYNC L-L
L-L SETTING
[V SYNC PHASE]
PRESET OFF
MENU BACK
MAIN MENU
LANGUAGE SET
TITLE OFF
EXPOSURE SET
DAY/NIGHT AUTO
WHITE BALANCE ATW
ALARM SET
OPTION SET
PRESET OFF
MENU END
SYNC L-L 0
L-L SETTING
[V SYNC PHASE]
PRESET OFF
MENU BACK
0
Settings/ Adjustments
.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և'' ߆ 'ވ''