Sanyo VCC-WD8575P - Manual (Page 31)

English 30
Settings/ Adjustments
Adjusting DAY/NIGHT Function
For accessing the MAIN MENU, see page 13 – 14.
The DAY/NIGHT function automatically switches over between COLOR and B/W mode depending on the ambient brightness;
for example, choosing COLOR mode during daytime, and B/W mode for nighttime monitoring with its increased sensitivity in a
darker environment. “AUTO” is preselected by default, which provides an automatic switch feature to detect the ambient
darkness. As appropriate for any specific environment, you can fix the mode to either COLOR or B/W, and adjust the way the
switching function works.
1 1 1 1 Select a mode.
R Image switches immediately after the selection is made.
2 2 2 2
For advanced settings, press the SET button.
R Each corresponding settings screen will appear.
■ AUTO: See page 31.
Automatically switches between COLOR and B/W mode depending
on the ambient brightness. (DAY/NIGHT function)
■ COLOR: See page 32.
Color image on a steady basis; suitable for always bright location or
conditions.
• If you specify this mode, you can forcibly switch between COLOR
and B/W by means of alarm input. (See page 43)
■ B/W (Black and White): See page 33.
B/W image on a steady basis; suitable when sensitivity is
prioritized.
Selecting DAY/NIGHT Mode
DAY/NIGHT
SET
OFF
INT
SET
ATW
SET
MAIN MENU
LANGUAGE
TITLE
SYNC
EXPOSURE
DAY/NIGHT AUTO
WHITE BALANCE
ALARM
OPTION
SET
PRESET OFF
MENU END
SET
ATW
MAIN MENU
LANGUAGE SET
TITLE OFF
SYNC INT
EXPOSURE
DAY/NIGHT AUTO
WHITE BALANCE
ALARM SET
OPTION SET
PRESET OFF
MENU END
.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և'' ߆ 'ވ''