Sanyo VCC-WD8575P - Manual (Page 36)

35 English
Adjusting White Balance
1 1 1 1
Select an area to be masked and specify “ON”.
R Masking will be applied for the area specified with “ON”.
• You can specify multiple masks. Repeat the above steps as
required.
• To disable the mask, select the area and specify “OFF”.
2 2 2 2
Set “MENU” to “END” and press the SET button.
R Finishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select “BACK” and
press the SET button.
ATW MASKING (Masking for ATW)
ATW MASKING
PRESET OFF
MENU BACK
CENTER OFF
RIGHT OFF
LEFT OFF
BOTTOM OFF
TOP OFF
TOP
BOTTOM
LEFT RIGHT CENTER
MEMO: • You can get an appropriate white balance by masking
an extremely bright light source or dark location.
• While setting the area, the masking is shown but is not
visible on the monitor screen.
[Settings Screen] [Monitor Screen]
.$%A:' 8%% 9&2 )$ EQTGANGUU DQQM  TVR''''և'' ߆ 'ވ''