Scientific Atlanta DPR300 Series - Manual (Page 25)

WebSTAR DPR300 Series Cable Modem Gateway User’s Guide
24
To connect Ethernet devices
Read the warnings and caution on this page. Then, follow the subsequent
installation procedures to ensure proper cable modem gateway operation when
connecting Ethernet network devices.
1. Select locations for Ethernet network devices. For more information, see
How Do I Select and Place Ethernet Network Devices?
, earlier in this
guide.
2. Connect an Ethernet port on the cable modem gateway to your PC.
3. Connect additional Ethernet network devices using the other Ethernet
ports on the cable modem gateway, or by connecting an Ethernet hub or
router to the cable modem gateway.
4. Connect the active RF coaxial cable to the CABLE IN connector on the
back of the cable modem gateway. Use an optional cable signal splitter to
add a TV, a DHCT or set-top converter, or a VCR.
5. After all connections are complete, insert the AC power adapter cord into
the DC power connector on the back of the cable modem gateway, and
then plug the power adapter into an AC power source.
6. The cable modem gateway begins an automatic search to locate and
sign on to the network. This process may take up to 5 minutes. The cable
modem gateway is ready for use when the CABLE status indicator on the
front panel stops blinking and illuminates continuously.
7. Verify that all Ethernet network devices are working properly.
You will not be able to check the Ethernet front panel status
indicators on the cable modem gateway until after two or more Ethernet
network devices are connected to the cable modem gateway.
WARNING:
• Hazardous electrical
voltages can be
present on any
connected wiring.
Ethernet wiring and
connections must be
properly insulated to
prevent electrical
shock. Disconnect
power from the
cable modem
gateway before
attempting to
connect to any
device.
• To avoid personal
injury, follow these
steps in the exact
order shown.
CAUTION:
To prevent possible
damage to the
equipment, disconnect
any other service
before connecting
your cable modem
gateway to other
devices.