Scientific Atlanta DPR300 Series - Manual (Page 8)

Front Panel Description
7
Front Panel Description
The front panel of your cable modem gateway provides status lights that indicate how well and at what state your
cable modem gateway is operating. After the cable modem gateway is successfully registered on the network, the
POWER
and CABLE status indicators illuminate continuously to show that the cable modem is active and fully
operational. The Ethernet, USB, HPNA, and Wireless indicators blink rapidly when data is being transferred on
the corresponding interface.
See the Front Panel Status Indicator table, in the Frequently Asked Questions section, later in this guide,
for more information on front panel status indicator functions.
The following illustration describes these front panel status indicators.
TM
T10388
1
3
4
5
6
7
2
1. POWER – Illuminates to indicate that power is being applied to the
cable modem gateway
2. DATA (Receive/Send) – Illuminates to indicate that data is being
transferred between the cable modem gateway and the cable network
3. CABLE – Illuminates to indicate that the cable modem gateway is
registered on the network and fully operational
4. ETHERNET – Illuminates to indicate that Ethernet device(s) are
connected
5. USB – Illuminates to indicate that a USB device is connected
6. HPNA – Illuminates to indicate that an HPNA connection is established
7. WIRELESS – Illuminates when the internal wireless access point is
operational (not available on all models)